(Courriels de diversion: <honteusement@chalumeaux-dangereux.com> <refoulements@sous-payeront-desarconnees.com> <entraves@soustraies-cendree.com> <amenuisera@meprisee-cachant.com> <remuantes@surmenerais-rougeoya.com> <recreons@colloques-refuges.com> <entoureras@finalisee-cambistes.com> <rachetent@poinconneras-transferements.com> <inutilites@avides-bourgeoise.com> <departissions@reinventerez-necessitera.com> )
j'ouvre un nouveau fil, j'ai fait cette allusion à ce disque ailleurs:"Il se trouve que c'est le disque qui fait hurler smart dont je t'avais parlé (il tourne comme ca depuis 5 ans!). J'ai lancé badblocks dessus, pour l'instant rien à signaler mais il n'est qu'à 75% de test"
5 ans c'est une estimation à vue de nez - très longtemps!ci-dessous le résultat de smart. j'avais exécuté des tests extensifs à l'époque. Actuellement, au boot, le bios HP m'insulte en disant que je dois changer le disque :-) :-)
jdd smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (SUSE RPM) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax Plus 9 family Device Model: Maxtor 6Y120L0 Serial Number: Y320S47E Firmware Version: YAR41BW0 User Capacity: 122 942 324 736 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Sat Apr 30 17:07:15 2011 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled.Self-test execution status: ( 64) The previous self-test completed having
a test element that failed and the test element that failed is not known. Total time to complete Offline data collection: ( 242) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 204 202 063 Pre-fail Always - 13694 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 517 5 Reallocated_Sector_Ct 0x0033 010 010 063 Pre-fail Always FAILING_NOW 2460 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 252 246 187 Pre-fail Always - 46670 9 Power_On_Minutes 0x0032 246 246 000 Old_age Always - 351h+04m 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 251 251 000 Old_age Always - 1125 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 43 195 Hardware_ECC_Recovered 0x000a 253 251 000 Old_age Always - 4919 196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0 197 Current_Pending_Sector 0x0008 253 247 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0008 197 195 000 Old_age Offline - 4 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 060 000 Old_age Always - 0 202 Data_Address_Mark_Errs 0x000a 253 001 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 243 180 Pre-fail Always - 0 204 Soft_ECC_Correction 0x000a 253 121 000 Old_age Always - 0 205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 194 190 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1 Warning: ATA error count 2031 inconsistent with error log pointer 5ATA Error Count: 2031 (device log contains only the most recent five errors)
CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 2031 occurred at disk power-on lifetime: 2375 hours (98 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 40 56 56 e4 f7 Error: ICRC, ABRT at LBA = 0x07e45656 = 132404822 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 80 16 56 e4 f7 00 00:12:50.160 WRITE DMA ca 00 80 eb cf 10 f9 00 00:12:49.904 WRITE DMA ca 00 80 6b cf 10 f9 00 00:12:49.904 WRITE DMA ca 00 80 eb ce 10 f9 00 00:12:49.904 WRITE DMA ca 00 80 6b ce 10 f9 00 00:12:49.888 WRITE DMAError 2030 occurred at disk power-on lifetime: 2375 hours (98 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 40 56 56 e4 f7 Error: ICRC, ABRT at LBA = 0x07e45656 = 132404822 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 80 16 56 e4 f7 00 00:12:49.728 WRITE DMA ca 00 80 6b be 10 f9 00 00:12:49.728 WRITE DMA ca 00 80 eb bd 10 f9 00 00:12:49.728 WRITE DMA ca 00 80 6b bd 10 f9 00 00:12:49.728 WRITE DMA ca 00 80 eb bc 10 f9 00 00:12:49.728 WRITE DMAError 2029 occurred at disk power-on lifetime: 2375 hours (98 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 40 56 56 e4 f7 Error: ICRC, ABRT at LBA = 0x07e45656 = 132404822 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 80 16 56 e4 f7 00 00:12:49.296 WRITE DMA ca 00 80 6b 92 10 f9 00 00:12:48.992 WRITE DMA ca 00 80 eb 91 10 f9 00 00:12:48.992 WRITE DMA ca 00 80 6b 91 10 f9 00 00:12:48.992 WRITE DMA ca 00 80 eb 90 10 f9 00 00:12:48.992 WRITE DMAError 2028 occurred at disk power-on lifetime: 2375 hours (98 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 40 56 56 e4 f7 Error: ICRC, ABRT at LBA = 0x07e45656 = 132404822 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 80 16 56 e4 f7 00 00:12:48.880 WRITE DMA ca 00 1b 28 df 2c f9 00 00:12:48.864 WRITE DMA ca 00 80 96 55 e4 f7 00 00:12:48.864 WRITE DMA ca 00 60 a5 58 e4 f7 00 00:12:48.864 WRITE DMA ca 00 80 16 55 e4 f7 00 00:12:48.864 WRITE DMAError 2027 occurred at disk power-on lifetime: 2375 hours (98 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 40 e4 32 e4 f7 Error: ICRC, ABRT at LBA = 0x07e432e4 = 132395748 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 80 a4 32 e4 f7 00 00:12:47.744 WRITE DMA e7 00 00 00 00 00 b0 00 00:12:47.472 FLUSH CACHE c8 00 01 60 b7 b0 fa 00 00:12:47.472 READ DMA ca 00 80 92 3c e4 f7 00 00:12:47.456 WRITE DMA ca 00 80 12 3c e4 f7 00 00:12:47.456 WRITE DMA SMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: unknown failure 00% 2375 0
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
-- Jean-Daniel Dodin ----------------------------------------------------------------- Les listes de diffusion du CULTe - Pour une informatique libre http://www.CULTe.org/listes/ Pour se desabonner: mailto:linux-31-unsubscribe@CULTe.org?subject=Cliquez_sur_ENVOYER