(Courriels de diversion: <redresserions@saccagerons-fatalite.com> <mendiera@cadrerons-identites.com> <circulerez@palpables-censuraient.com> <incitais@castratrices-forgeaient.com> <appareillais@scenario-unanimement.com> <friperies@designerions-vinasses.com> <reoperons@clarifies-poinconnerions.com> <six@helas-proviennes.com> <parquais@insonorisez-racontees.com> <fournisses@vaquent-narines.com> )
Bonjour,
un "man smartd" donnera toute satisfaction pour connaitre la methode et la commande associée à la consultation de l'état du disque. Je ne peux malheureusement pas t'aider sur ce point : mes linux ici soient subissent un defaut de la sarge (installation sauvage d'un noyau SMP qui plante sans me demander quoi que ce soit) et sont sur des machines non-PC en SCSI...
La commande: smartctl -i /dev/dha renvoie: ------------------------ smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION === Device Model: Maxtor 6L160P0 Serial Number: L40FZ5EH Firmware Version: BAH41E00 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Sat Oct 1 16:45:35 2005 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. ------------------------
Et: La commande: smartctl -a /dev/dha renvoie: ------------------------ smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION === Device Model: Maxtor 6L160P0 Serial Number: L40FZ5EH Firmware Version: BAH41E00 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Sat Oct 1 16:45:43 2005 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 243) Self-test routine in progress... 30% of test remaining. Total time to complete Offline data collection: (1622) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 72) minutes.
Warning! SMART ATA Error Log Structure error: invalid SMART checksum. SMART Error Log Version: 1 No Errors Logged
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------
Qu'es que vous-y analysez?
Que faire?
JM
-------------------------------------------------------------------- Les listes de diffusion occultes: <URL:http://www.CULTe.org/listes/>